Short answer: Cumulative voting gives each voter as many votes as there are seats to fill. The voter can put all of them on one candidate or split them however they like. The top vote-getters win. To guarantee one seat, a group needs more than the votes cast divided by the number of seats plus one. On a 5-seat board with 120 voters, that is 21 voters.
How Cumulative Voting Works
Each voter starts with one vote per seat. A member electing a 5-seat board gets 5 votes. A shareholder with 500 shares electing 5 directors gets 2,500 votes.
The voter then spends those votes in any combination. The SEC’s Investor.gov glossary entry on cumulative voting uses a four-seat example: 500 shares become 2,000 votes, which the holder can give to one nominee or spread across several.
When voting closes, the candidates with the highest totals fill the seats. Voters can split their votes in many ways:
- Spread evenly: 1 vote each to five candidates.
- Partial concentration: 3 votes to one candidate, 2 to another.
- Full concentration (sometimes called plumping): all 5 votes to a single candidate.
Cumulative Voting vs. Straight Voting
Under straight voting, a voter can give each candidate at most one vote per share or membership. A group with a majority can elect every seat.
Cumulative voting lets a smaller group concentrate its votes and win some seats. That is why it is often described as a protection for minority shareholders or members.
| Question | Straight voting | Cumulative voting |
|---|---|---|
| Votes per voter (5 seats) | Up to 1 per candidate, 5 candidates | 5 total, any split |
| Can a voter give one candidate 5 votes | No | Yes |
| Can a 51% group win every seat | Yes | Not if a minority clears the threshold |
| Main risk | Minority groups shut out | A group splits its votes too thin |
The Cumulative Voting Formula for Electing a Director
The widely used formula for the number of shares (or votes) needed to guarantee seats is:
N = (S × D) ÷ (T + 1) + 1
- N is the number of shares or voters your group needs.
- S is the total shares or voters actually voting.
- D is the number of directors your group wants to elect.
- T is the total number of seats being filled.
The formula is discussed in a South Carolina Law Review article by Amihai Glazer, Debra G. Glazer, and Bernard Grofman. The authors point out its limits: it can be slightly off with fractions, and it ignores strategy when three or more groups compete.
In practice, round (S × D) ÷ (T + 1) down to a whole number, then add 1. That gives the smallest whole number that guarantees the seats if your group concentrates its votes evenly on D candidates.
S counts only shares or voters that actually vote, so the threshold falls when turnout is low. The guarantee holds however the other side votes.
Worked Example: A 5-Seat Board With 120 Voters
Picture an association with 120 voting members electing 5 directors. Each member has 5 votes, so 600 votes are in play. A group of 30 members backs one candidate, F. The other 90 members back a slate of five: A, B, C, D, and E. This is an illustrative example, not a real election.
Seats Each Group Can Guarantee
Apply the formula with S = 120 and T = 5. For one seat: 120 × 1 ÷ 6 = 20, plus 1 = 21 voters.
| Seats to guarantee (D) | Calculation | Voters needed | Share of 120 |
|---|---|---|---|
| 1 | 120 × 1 ÷ 6 + 1 | 21 | 17.5% |
| 2 | 120 × 2 ÷ 6 + 1 | 41 | 34.2% |
| 3 | 120 × 3 ÷ 6 + 1 | 61 | 50.8% |
| 4 | 120 × 4 ÷ 6 + 1 | 81 | 67.5% |
| 5 | 120 × 5 ÷ 6 + 1 | 101 | 84.2% |
The 30-member group clears 21, so it can guarantee one seat. It falls short of 41, so it cannot guarantee two. Note the third row: a simple majority of 61 guarantees only 3 of the 5 seats.
A Sample Tally
The majority’s 450 votes spread a little unevenly across its slate: 94, 91, 90, 88, and 87. The 30-member group has 150 votes to place.
| Candidate | Group concentrates on F | Group splits between F and G |
|---|---|---|
| F | 150 (elected) | 75 |
| G | 0 | 75 |
| A | 94 (elected) | 94 (elected) |
| B | 91 (elected) | 91 (elected) |
| C | 90 (elected) | 90 (elected) |
| D | 88 (elected) | 88 (elected) |
| E | 87 | 87 (elected) |
When the group concentrates, F wins a seat and the majority takes four. The majority cannot stop it: beating 150 on all five seats would take at least 755 votes, and the majority has 450.
What Happens If the Group Splits Its Votes
When the group splits 75 and 75, both of its candidates finish below the majority’s fifth candidate. The majority sweeps 5 to 0. Over-splitting is how a minority group loses a seat it could have won. The formula tells a group how many candidates it can safely support.
Under straight voting, A through E would each get 90 votes and no minority candidate could top 30.
Cumulative Voting Calculator: Steps and Spreadsheet Formulas
You can build a cumulative voting calculator in any spreadsheet in a few minutes. Put total votes cast (S) in cell B1, total seats (T) in B2, and seats wanted (D) in B3.
- Count the shares or voters you expect to vote.
- Enter the number of seats being filled in this election.
- For voters needed, enter
=INT(B1*B3/(B2+1))+1. - For seats your group can guarantee with X voters in B4, enter
=MIN(B2,INT((B4*(B2+1)-1)/B1)). - Rerun the numbers at lower turnout. Fewer votes cast lowers the threshold for every group.
For a company with 10,000 shares voting and 5 seats, one seat needs 10,000 ÷ 6 = 1,666.67. Round down to 1,666 and add 1: 1,667 shares.
When Bylaws or Corporate Law Allow Cumulative Voting
Whether you can use cumulative voting depends on your state and governing documents. The statutes below are examples. Confirm with your bylaws and counsel before you change methods.
Business Corporations
- California: Corporations Code Section 708(a) lets shareholders cumulate in director elections, with exceptions in Sections 301.5 and 708.5. Under 708(b), a shareholder must give notice at the meeting before voting, and then all may cumulate.
- Delaware: Title 8, Section 214 allows cumulative voting only if the certificate of incorporation provides for it.
- North Carolina: G.S. 55-7-28(b) says shareholders have no right to cumulate unless the articles provide for it.
Our guide to corporate board elections online covers the rest of the process.
Nonprofits and HOAs
- California public benefit nonprofits: Corporations Code Section 5616 lets members cumulate only if the articles or bylaws authorize it, with the same notice step.
- California mutual benefit nonprofits: Section 7513(e) says directors may not be elected by written ballot without a meeting when they are elected by cumulative voting under Section 7615.
- California HOAs: Civil Code Section 5115(e) says an association “shall allow for cumulative voting using the secret ballot procedures” if its governing documents provide for it. See our guide to California HOA electronic voting.
Rules in other states vary. If your bylaws are silent, adding cumulative voting usually takes a bylaw amendment.
How to Run a Cumulative Vote Online
Clear voter instructions do most of the work. Tell voters how many votes they have, that they can give all of them to one candidate, and what happens to votes they leave unused. A short line works: “You have 5 votes. Give them all to one candidate, or split them among up to 5 candidates.”
On paper, a voter can write in more votes than allowed, which can spoil the ballot or start a dispute. Online ballots can block that.
ElectionChamp supports cumulative voting alongside plurality, ranked choice, and approval. Different questions on one ballot can use different voting methods, so a cumulative board race can sit next to a yes or no motion. For share-based votes, add a whole-number weight column to the voter list. Results are ready when voting closes. A 120-voter election like the example costs $10.
Frequently Asked Questions
How does cumulative voting work?
Each voter gets one vote per open seat and can give all of them to one candidate or split them among several. The candidates with the most total votes fill the seats. With 5 seats and 5 votes, the top 5 vote-getters win.
How many shares do you need to elect one director with cumulative voting?
Divide the total shares voting by the number of seats plus one, round down, and add one. With 10,000 shares voting and 5 seats, that is 10,000 divided by 6, rounded down to 1,666, plus 1, for 1,667 shares.
Is cumulative voting good for minority shareholders?
It gives a minority group a path to at least one seat if it holds more than the threshold and concentrates its votes. Under straight voting, a majority can elect every director. A minority that splits its votes too thin can still win nothing.
Is cumulative voting required for boards of directors?
It depends on your state and documents. California Corporations Code Section 708 gives shareholders the right to cumulate, with exceptions. Delaware allows it only if the certificate of incorporation provides for it. Confirm with your bylaws and counsel.
Planning your next vote? Read about voting methods and instant results, or see pricing: free up to 20 voters, $10 up to 200, then $0.05 per voter.